EVO Hand Held Remote (Wireless)

Description

Jasic Wireless Handheld Remote Control – EVO Series

A Jasic wireless handheld remote control coupled with a 30 meter range and digital settings display.  Designed to provide a convenient method of adjusting the welding machine function settings. Compatible with the EVO 2.0 MIG and TIG Inverter Welders.

The Jasic EVO Bluetooth Remote Control Wireless (HRC-02) enables the welder to alter the welding current (among other settings that are listed below and depends on the process being used) without the need of making multiple trips to the power source, or if you’re working with longer welding cables. Which therefore not only increases productivity but also safety. With this in mind, there will also be an increase in the quality of the welds produced. Again this can be attributed to not having to make numerous trips to the welder for parameter adjustment. A dedicated wireless remote control with no mechanical parts and a straightforward single button power control. Comes complete with a transceiver.

Features & Benefits

• Adjustable Welding Machine function settings.
• Impressive 30 meter wireless range
• Increase Productivity and Safety
• Enhances weld quality
• Dedicated Remote Control without Mechanical Parts
• Digital Settings Display

Compatibility

The Jasic EVO bluetooth Remote Control (HRC-02) is compatible with the following Inverter Welders from the EVO 2.0 range -:

MIG Machines

• Jasic EVO MIG 160 PFC (EM-160C)
• Jasic EVO MIG 200 PFC (EM-200C)
• Jasic EVO MIG 200CT PFC (EM-200CT)
• Jasic EVO MIG 250CT PFC (EM-250CT)

Each machine listed above will allow you to control the following settings remotely -:

• MIG Non Synergic Mode – Adjust Wire Feed Speed and Welding Voltage
• MIG Synergic Mode – Adjust Welding Current and Welding Voltage
• Lift TIG Mode – Adjust Welding Current

TIG Machines

• Jasic EVO TIG 200 PFC (ET-200)
• Jasic EVO TIG 200P PFC (ET-200P)
• Jasic EVO TIG 200 AC/DC PFC (ET-200PACDC)

Each machine listed above will allow you to control the following settings remotely -:

• DC TIG Mode – Adjust Welding Current
• DC Pulse TIG Mode – Adjust Welding Current and Pulse Frequency
• AC Pulse TIG Mode – Adjust Welding Current and AC Balance

• Jasic EVO HRC-01 HRC-02 & HRC-04 Hand Remote Manual V1 – Operating Manual