HYPERTHERM POWERMAX 105 SYNC HAND PLASMA CUTTER (415V)

£6,400.00 {price excluding tax}

The Powermax105 SYNC® is a next-generation, professional-grade air plasma cutter that dramatically simplifies system operation for gouging and recommended cutting up to 32 mm (1-1/4″). Features automated system process set-up via advanced RFID-enabled SmartSYNC® torches, and a revolutionary single-piece cartridge consumable that provides trackable utilization data. The Powermax105 SYNC maximizes productivity through reductions in downtime, optimized cut quality performance, and streamlined consumable inventory management.

Description

Applications

Drag cutting

For dragging the torch directly across the work piece

Drag cutting

Extended reach cutting

For improved visibility and accessibility when cutting in confined spaces

Extended reach cutting

Extended reach gouging

For improved visibility and accessibility when gouging in confined spaces

Extended reach gouging

Fine feature cutting

For narrow kerf width with minimal dross and heat affected zone

Fine feature cutting

Flush cutting

For cutting closer to base materials using a 45 degree

Flush cutting

Max control gouging

For precise metal removal, shallower gouge profiles and light metal washing

Max control gouging

Max removal gouging

For aggressive metal removal, deep gouge profiles, and extreme metal washing

Max removal gouging

Mechanized cutting

For portable automation and table cutting

Mechanized cutting

Specifications

Cut capacity

Capacity Thickness Cut speed
Recommended 32 mm (1-1/4″) 500 mm/min (20 ipm)
38 mm (1-1/2″) 250 mm/min (10 ipm)
Severance (hand cutting) 50 mm (2″) 125 mm/min (5 ipm)
Pierce* 22 mm (7/8″)

Maximum removal gouging

Capacity Metal removal rate Gouge profile
Typical gouge 8,6 kg (19.1 lbs.) per hour 6,6 mm D x 6,0 mm W (0.26″ D x 0.24″ W)

General specifications

Input voltages 200–600 V, 3-PH, 50/60 Hz
Kilowatt output 16.8 kW
Input current 200/208/240/480/600 V,

3-PH 58/56/49/25/22 A @ 16.8 kW

Output current 30–105 A
Rated output voltage 160 VDC
Duty cycle @ 104° F 70% @ 105 A, 240 V, 3-PH

80% @ 105 A, 480–600 V, 3-PH

100% @ 94 A, 480–600 V, 3-PH

100% @ 88 A, 240 V, 3-PH

Open circuit voltage (OCV) 300 VDC
Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
Weight w/7,6 m (25′) torch 45.3 kg (95 lbs.)
Gas supply Clean, dry, oil-free air or nitrogen
Optimum inlet gas pressure 7.6–8.3 bar (110–120 psi)
Minimum inlet gas pressure 5.5 bar (80 psi)
Recommended inlet gas flow rate Cutting: 260 I/min @ 5.9 bar (550 scfh, 9.2 scfm @ 90 psi)

Gouging: 260 I/min @ 4.8 bar (550 scfh, 9.2 scfm @ 70 psi)

Input power cable length 3 m (10′)
Power supply type Inverter–IGBT
Engine drive requirement 30 kW for full 105 A output
Certifications CSA-certified for use in the Americas and Asia, except China
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty