TURBO™ M-TAP

£29.97£258.75

TAPPING ACCESSORIES

VERSATILE, QUICK AND EFFECTIVE SOLUTIONS FOR TAPPING THROUGH HOLES WITH ANY REVERSE SPEED MAGNETIC DRILL OR IMPACT WRENCH USING JEI’S IMPACT SOCKET ADAPTOR

Provides a far more economical investment than using costly tapping heads and collets.

A VERSATILE, QUICK AND EFFECTIVE SOLUTION TO PROVIDE A BOLT READY THREAD TO PRE-EXISTING HOLES.

  • Feature a 19mm shank to fit directly into the cutter arbor
  • Ideal for use with JEI magdrill models HM50T and HM100T
  • For through holes only
  • Versatile for use in any magdrill with reverse and variable speed control
  • Can be used with an impact wrench using one of our impact socket adaptors, to tap through 12 mm depth
  • Available in sizes ranging from M8 – M30
  • Purchase as a handy 5 piece set including sizes M8, M10, M12, M16 & M20 plus both impact socket adaptors

Description

TURBO™ M-TAP FOR USE WITH A MAGNETIC DRILL WITH REVERSE OR AN IMPACT WRENCH USING JEI’S IMPACT SOCKET ADAPTORS

The Turbo™ M-Tap can be used directly in any magdrill with reverse for tapping through holes

The Turbo™ M-Tap can be used with an impact wrench using our impact socket adaptor (available on 1/2″ and 3/4″ drive) up to a maximum depth of 12 mm.

The Turbo™ M-Tap’s are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2″ & 3/4″ impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench

A one piece drilling and tapping solution saving the customer both on cost and time. Requires a pilot hole.

  • Feature a 19 mm shank to fit straight into cutter arbor
  • Ideal for JEI models HM50T and HM100T
  • For through holes only
  • Available in sizes ranging from M8 – M30

Our tap holders are a cost effective solution for using DIN376 type taps directly in any magnetic drilling machine with reverse, to tap pre-existing holes.

  • Feature a 19 mm shank to fit straight into the cutter arbor
  • Ideal for use with JEI models HM50T and HM100T
  • Designed to suit standard DIN 376 type taps
  • Inexpensive option to suit existing taps
  • For through holes only
  • Available in sizes ranging from M8 – M30

The Turbo™ M-Tap’s are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2″ & 3/4″ impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench